-> Click on Next button on the next message box.



-> Check on Connect to the network at my workplace and click on Next button to continue.



-> Check on Dial-up connection and click on Next button to continue.



-> On the Network Connection Wizard window, type in pnmt on Type a name for this connection in the following box. Click on Next button to continue.



-> Enter any number in the Phone number box. Click on Next button to continue.



-> Verify that the connection pnmt has registered. You can also create a shortcut on your desktop if you need. Click on Finish button.



-> On the Connect Dial-up Connection window, click on Cancel button to continue. Click Properties button on Connect Dial-up Connections window or right-click and select Properties on highlight new item for pnmt..



-> On the Dial-up Connection Properties window, verify that selected device is Modem- Standard 19200 bps Modem [COM1] on the General tab. Click on the Configure button.



-> On the Modem Configuration window, check off all five boxes.



-> On the Option tab, keep default setting and click on the Security tab.



-> On the Security tab, keep default setting and click on the Networking tab.



-> On the Networking tab, verify that Type of dial-up server I am calling is PPP and check off File and Printer and Client for Microsoft.



-> Click on Settings button. Uncheck all the boxes on the ensuing window just as shown in figure below. Click OK go back and highlight Internet Protocol (TCP/IP) then click on the properties box.



-> Verify that both Obtain an IP address automatically and Obtain DNS server address automatically are selected.



-> On the Advanced TCP/IP Settings window, check off Use IP header compression in the PPP link. Click OK button.



-> On the Advanced tab, keep default setting and click OK button.

-> Select country and input area code on Location Information. Click on OK button to continue.



-> Verify Location and Area Code.



-> Select Modem tab, click on Add button to continue detecting modem.



-> Check on Don’t detect my modem… box and click on Next button to continue.



-> Select Standard Modem Types and Standard 19200bps Modem from Manufacturer and Models list respectively. Click on Next button to continue.



-> Select Selected ports and COM1, then click on Next button to continue. If you are using multi-port configuration, select All ports to install the standard 19200 bps modem driver to all available COM ports.



-> Click on Finish button to finalize the new modem installation.



-> Verify that COM1 Standard 19200 bps Modem is displayed on the list. Click on OK button.

At Computer Management window click Device Manager. Click Port (COM & LPT) Device and see what COM that connected i.e COM1 (this sample use usb to serial cable).



-> Login to Minilink Service Manager (MSM 6).



-> Go to Config Tab, and choose Configure Communication. In Serial Port Number Choose what COM that will be synchronization. i.e COM1.







-> Go to Network Tab and choose Scan Local, If we can find the Network so the synchronization has success.